Valves recap |
Fittings recap | 
Brass valves with calibres ≤ 50 | 
Brass valve DN 20 type D |
Brass valves calibre 15. Types: E, E1, EA, E1A and D
|
Security valves DN 25 1/4 turn double action and valves DN 25, MOP 5 bar, types E, EA, E1, E1A, C, M |
Valves with 2 flat washers known as "CM25 type 73" calibre 25 | 
Valve DN 32 and valve DN 25 | 
Brass valve 1/4 de turn DN50 |
Brass valve 1/4 turn bent at 90° with sphero-conical junction and metal-plastic fitting with mechanical tightening for PE pipe
|
Plastic-plastic and metal-plastic fittings with mechanical tightening for polyethylene pipe |
Mechanical fittings for polyethylene networks | 
Metal-plastic mechanical fittings for PE pipe | 
ASSEMBLY KIT for S2300 cabinet |
Transition fittings MPB and MPC to connect the flexible hoses of flares MPC DN25 or DN50
|
Outlet swanneck swivel for S22 cabinet |
Meter base replacement for domestic calibration periodic check, reduction lengthen , reduction S-bent fitting | 
Manufacture of low pressure gas risers pre-fabricated elements of diametres 28, 35, 54 | 
Brass cap DN 32 for cast iron network, brass connection socket DN 32 for cast iron network |
Brass cap C20 and C25 with cylindrical thread to screw on cast iron pipe (low pressure), brass socket C20 and C25 with cylindrical thread to screw on cast iron pipe (low pressure) for PE pipe
|
Brass cap C32 and C50 with cylindrical thread to screw on cast iron pipe (low pressure), brass socket C32 and C50 with cylindrical thread to screw on cast iron pipe (low pressure) for PE pipe |
Connection socket to weld on steel for PE pipe diametre 20 mm | 
Steel connection sockets to weld on steel pipes for PE pipe Ø 20, 32 and 40 mm - Compression fittings | 
Guide sheet MROB115 | |
